Vca Configuration; Vca Resource Type; Vca Information - Interlogix TruVision TVB-5702 Configuration Manual

VCA configuration

The camera can do video content analysis (VCA) and send the video analytics results
(metadata) to an NVR or other platforms to generate a VCA alarm.

VCA resource type

You need to specify which type of VCA resource is to be used.
To select the VCA resource type:
1. From the Configuration panel, click
Type.
2. Select one of the options:
Measurement + Behavior Analysis + Standard VCA Functions: When enabled,
this lets you configure the parameters to measure temperature, display VCA
information and behavioral analysis. See "VCA information" below and "Behavior
analysis" on page 56 for more information.
Fire Source Detection: When enabled, this lets you configure the parameters to
configure the parameters to trigger an alarm when the camera detects a fire source.
See "Fire source detection" on page 43 for further information.
3. Click Save to save the settings.

VCA information

You can set up the camera to display information on the target and alarm rules in the
video image. You can also configure the quality and resolution of snapshots and
streamed images. This function also displays the version of the algorithm library used.
Note: This function is only available when
Analysis + Standard VCA Functions
Configuration > System
above.
To set up VCA information:
1. From the Configuration panel, click
2. Select the check boxes for the desired display information and snapshot settings.
54
Configuration
Temperature Measurement + Behavior
has been enabled under the menu
> VCA Resource Type. See the section "VCA resource type"
VCA Configuration
> System > VCA Resource
> VCA Info
TruVision IP Thermal Camera Configuration Manual