9.
Save Downloaded Files to
Snapshot and Clip Settings
10.
Save Snapshots In Live
View To
11.
Save Snapshots When
Playback To
12.
Save Clips To
Configuration menu
Use the Configuration panel to configure the server, network, camera, alarms, users,
transactions and other parameters such as upgrading the firmware. See Figure 3 below
for descriptions of the configuration menus available.
Figure 3: Configuration window ('System > Device Information' shown)
Configuration menus
1. System
2. Network
3. Video/Audio
4. Image
TruVision IP Thermal Camera Configuration Manual
Description
Specifies the directory for downloaded files.
Specifies the directory for saving snapshots in live view mode.
Specifies the directory for saving snapshots in playback mode.
Specifies the directory for saving video clips in playback mode.
Description
Defines device basic information including SN and the current firmware
version, time settings, maintenance, serial port parameters, and VCA resource
type. See "System time configuration" on page 12 for further information on
time parameters.
Defines the network parameters required to access the camera over the
internet. See "Network configuration" on page 14 for further information.
Defines recording parameters. See "Video and audio " on page 22 for further
information.
Defines the image parameters, OSD settings, overlay text, privacy masking,
picture overlay, and defective pixel correction. See "Image" on page 25, "OSD"
on page 26, "Overlay text" on page 28, "Privacy mask" on page 29, "Picture
overlay" on page 30, and "Defective pixel correction" on page 30 for further
information.
11