System Time Configuration - Interlogix TruVision TVB-5702 Configuration Manual

System time configuration

NTP (Network Time Protocol) is a protocol for synchronizing the clocks of network
devices, such as IP cameras and computers. Connecting network devices to a
dedicated NTP time server ensures that they are all synchronized.
To define the system time and date:
1. From the Configuration panel, click
2. From the Time Zone
camera's location.
3. Under Time Sync, select one of the options for setting the time and date:
Synchronize with an NTP server: Select the
NTP address. The time interval can be set from 1 to 10080 minutes.
- Or -
Set manually: Enable the
system time from the pop-up calendar.
Note: You can also select the
the time of the camera with the time of your computer.
4. Select Enable DST
date of the DST period.
5. Click Save to save changes.
TruVision IP Thermal Camera Configuration Manual
Configuration
drop-down menu, select the time zone that is the closest to the
Manual Time Sync
Sync with computer time
to enable the DST (Daylight Savings Time) function, and set the
> System > Time
NTP enable box and enter the server
function and then click
check box to synchronize
Settings.
to set the
13