Interlogix TruVision TVB-5702 Configuration Manual page 25

Tab Parameter descriptions
Frame Rate: Specifies the frame rate for the selected resolution.
The frame rate is the number of video frames that are shown or sent per
second.
Note: The maximum frame rate depends on the camera model and selected
resolution. Please select the camera specifications in its datasheet.
Max bit rate: Specifies the maximum allowed bit rate. A high image
resolution requires that a high bit rate must also be selected.
Video Encoding: Specifies the video encoder used.
Profile: Different profile indicates different tools and technologies used in
compression. Options include: High Profile, Main Profile, and Basic Profile.
I-Frame Interval: A video compression method. It is strongly recommended
not to change the default value 50.
SVC: The scalable video coding feature standardizes the encoding of a high-
quality video bit stream that contains one or more subset bit streams. Select
On, Off, or Auto.
Smoothing: Adjust the smoothness of the stream.
2. Audio Audio Encoding: G.722.1, G.711ulaw, G.711alaw, MP2L2, G.726, and PCM
are optional.
Audio Input: Only "Linein" is available for the pickup microphone.
Input Volume: Specifies the volume from 0 to 100.
Environmental Noise Filter: Set it as OFF or ON. When you set the function
on the noise detected can be filtered.
3. ROI This function lets you assign more encoding resources to the region of
interest (RoI) in order to increase the image quality of the RoI compared to
that of background. The RoI image then appears more focused than that of
the background. See page 24 for setup information
TruVision IP Thermal Camera Configuration Manual 23