Storage Configuration; Snapshot Parameters - Interlogix TruVision TVB-5702 Configuration Manual

Storage configuration

Use the storage management window to display the capacity, free space available, and
the working status of the HDD of the NAS and the SD card in the camera. You can also
format these storage devices. The storage devices must be added to the system before
they can be managed.
Before formatting a storage device, stop all recording. Once formatting is completed,
reboot the camera as otherwise the device will not function properly.
If Overwrite is enabled, the oldest files are overwritten when the storage device
becomes full.

Snapshot parameters

You can configure continuous snapshots and event-triggered snapshots. The captured
snapshots can be stored in the SD card (if supported) or on a NAS. You can also
upload the snapshots to an FTP server.
You can set up the format, resolution, and quality of the snapshots.
62 TruVision IP Thermal Camera Configuration Manual