Table of Contents
Advertisement
To upgrade the firmware via TruVision Device Manager:
1. In the
FW upgrader
multiple devices for simultaneous upgrading.
2. Click the browse button
If you want the device to automatically reboot after the upgrade, select the
the device after upgrading
default settings
3. Click Upgrade.
4. When the upgrading is completed, the updated version information on the devices is
listed.
Reboot the camera
The camera can be easily rebooted remotely.
To reboot the camera through the web browser:
1. From the Configuration panel, click
2. Click the
Reboot
76
panel, select a device or hold the Ctrl or Shift key to select
to locate the firmware file to use.
check box. When enabled, it will also display
option. Check it if you want to restore all parameters.
Configuration
button to reboot the device.
>
System
> Maintenance.
TruVision IP Thermal Camera Configuration Manual
Reboot
Restore
Advertisement
Table of Contents
