IP address filter
This function allows you to give or deny access rights to defined IP addresses. For
example, the camera is configured so that only the IP address of the server hosting the
video management software is allowed to be accessed.
To define IP Address Filter:
1. From the Configuration panel, click
2. Select the check box of
3. Select the type of IP Address Filter in the drop-down list: Forbidden or Allowed.
4. Click
Add
to add an IP address.
5. Click
Modify
or
6. Click
Clear
to delete all the IP addresses.
7. Click
Save
to save the changes.
Defining the security service
This function enables SSH (Secure Shell), which is a cryptographic network protocol.
You can define its password. It is only used by Technical Support.
You can also set up the system so that the camera is locked if someone incorrectly
enters the user name or password after five consecutive attempts. When the IP
address is locked, you must wait ten minutes to log into the camera again.
TruVision IP Thermal Camera Configuration Manual
Enable IP Address
Delete
to modify or delete the selected IP address.
Configuration
>
Security
Filter.
>
IP Address
Filter.
73