Table of Contents
Advertisement
Configuration menus
5. Security
6. Basic Event
7. Smart Event
8. Storage
9. Temperature
Measurement
VCA configuration menu
Use the VCA Configuration panel to configure how target and rule information is
displayed on a snapshot and in a video stream, the snapshot quality and resolution, as
well as set up the response to suspicious behavior. See "VCA information" on page 54
and "Behavior analysis" on page 56 for more information.
Device information
You can quickly see the information about the camera as well as change the camera
name and device number. See Figure 3 on page 11 for descriptions of the configuration
menus available.
To display the camera device information:
1. From the Configuration panel, click
Information.
2. If desired, you can change the camera name and device number.
3. Click
Save
to save changes.
12
Description
Defines who can use the camera, their passwords and access privileges,
RTSP authentication, IP address filter, SSH access, restoring default settings,
firmware upgrade. See "User management" on page 69, "RTSP
authentication" on page 72, "IP address filter" on page 73, "Defining the
security service" on page 73, and "Restore default settings" on page 74 for
further information.
Defines motion detection, video tampering, alarm input/output, and exception.
You can also import/export configuration files. See "Motion detection alarms"
on page 30, "Video tampering alarms" on page 38, "Alarm inputs and outputs"
on page 39, "Exception alarms" on page 40, and "Import/export a configuration
file" on page 75 for further information.
Defines audio exception detection, scene change detection, and fire source
detection. See "Audio exception detection" on page 41" on page 40, "Scene
change detection" on page 42, and "Fire source detection" on page 43 for
further information.
Defines recording schedule, storage management, NAS configuration, and
snapshot parameters. See Snapshot parameters" on page 54, "NAS settings"
on page 65, "Storage " on page 66, and "Recording schedule" on page 67 for
further information.
Defines temperature measurement and temperature measurement and alarm.
See "Temperature measurement" on page 46 for further information.
Configuration
>
System
>
Device
TruVision IP Thermal Camera Configuration Manual
Advertisement
Table of Contents
