Table of Contents
Advertisement
4. Select whether the recording will be for the whole week
specific days of the week.
If you have selected "All Day", select one of the record types to record from the
drop-down list box:
•
Continuous: This is continuous recording.
•
Motion detection: Video is recorded when the motion is detected.
•
Alarm: Video is recorded when the alarm is triggered via the external alarm
input.
•
Motion | Alarm: Video is recorded when the external alarm is triggered or
motion is detected.
•
Motion & Alarm: Video is recorded when motion and alarms are triggered at the
same time.
•
Audio Exception Detection: Video is recorded when audio exception is
triggered.
•
Scene Change detection: Video is recorded when a change in the camera
scene is detected. See "Scene change detection" on page 42 for more
information.
•
VCA Recording: Video is recorded when a VCA event is triggered.
•
Fire Source Detection: Video is recorded when a file source is detected.
•
Temperature Measurement Alarm: Video is recorded when the temperature
measurement alarm is triggered.
•
Temperature Measurement Pre-alarm: Video is recorded when the
temperature measurement pre-alarm is triggered.
•
Temperature Difference Alarm: Video is recorded when the temperature
difference alarm is triggered.
•
All Events: Video is recorded when any of the above-mentioned events
happens.
5. If you enable "Customize", click the day of the week required. For period 1, set the
start and end times during which you want the camera to begin and end recording.
From the drop-down list box, select one of the record types to record (see the list
above).
Repeat for additional periods in the day. Up to eight time periods can be selected.
Note: The eight time periods cannot overlap.
6. Set the recording periods for the other days of the week if required.
Click
Copy
to copy the recording periods to another day of the week.
7. Click
OK
and
Save
Note: If you set the record type to "Motion detection" or "Alarm", you must also define
the arming schedule to trigger motion detection or alarm input recording.
68
to save changes.
(All Day
recording) or for
TruVision IP Thermal Camera Configuration Manual
Advertisement
Table of Contents
