Image Display Configuration - Interlogix TruVision TVB-5702 Configuration Manual

Image display configuration

You may need to adjust the camera image depending on the camera model or location
background to get the best image quality. You can adjust the brightness, contrast,
saturation, hue, and sharpness. See Figure 6 below.
Use this menu to also adjust camera behavior parameters such as exposure time, iris
mode, video standard, day/night mode, image flip, WDR, digital noise reduction, white
balance, and indoor/outdoor mode. All changes are automatically saved.
Figure 6: Image > Display Settings window
Parameter Description
1. Image Adjustment
Brightness, Modifies the different elements of the picture quality by adjusting the position of
Contrast the values for each of parameter.
FFC (Flat Field This improves the quality of the digital image. It removes non-uniformities in the
Correction) image caused by different sensitivities of the pixels and by distortions caused by
optics. Select Scheduled, Temperature, or OFF.
Scheduled: Select the refresh interval to remove non-uniformities: 10, 20, 30, 40,
50, 60, 120, 180, or 240 minutes.
Temperature: Camera adjusts the live view image according to its temperature.
OFF: Disable this function.
Interval Specifies the interval time between checking live view images.
Select one of the options: 10, 20, 30, 40, 50, 60, 120, 180, or 240 minutes.
Background Fully cover the lens with an object (a lens cover is recommended) and click the
Correction "Correct" button. The camera then adjusts the image according to the current
environment.
Manual Click the "Correct" button. The camera then adjusts the image according to the
Correction temperature of the camera itself.
TruVision IP Thermal Camera Configuration Manual 25