Table of Contents
Advertisement
Menu tabs
2.
Port
3.
DDNS
4.
PPPoE
5.
SNMP
6.
802.1.X
7.
QoS
8.
FTP
TruVision IP Thermal Camera Configuration Manual
Description
Multicast Address: Enter a D-class IP address between 224.0.0.0 to
239.255.255.255. Only specify this option if you are using the multicast function.
Some routers prohibit the use of multicast function in case of a network storm.
Enable Multicast Discovery: Select to enable the automatic detection of the
online network camera via private multicast protocol in the LAN.
DNS server: Enter the DNS server address for your network.
Host Name Configuration: Assign a hostname to recorder to be used to identify
it over the network. Select "Enable dynamic" and enter your DNS name for the
system. The DNS name must be unique and can contain letters, numbers and
hyphens.
HTTP Port: Use the HTTP port to remotely access the internet browser. Enter
the port used for the Internet Explorer (IE) browser. Default value is 80.
RTSP Port: RTSP (Real Time Streaming Protocol) is a network control protocol
designed for use in entertainment and communications systems to control
streaming media servers. Enter the RTSP port value. The default port number is
554.
HTTPS Port: HTTPS (Hyper Text Transfer Protocol Secure) allows video to be
securely viewed when using a browser. Enter the HTTPS port, value. The
default port number is 443.
Server Port: This is used for remote client software access. Enter the server
port value. The default port number is 8000.
Alarm Server IP: Specifies the IP address of the alarm host.
Alarm Server Port: Specifies the port of the alarm host.
See page 17 for setup information.
DDNS is a service that maps Internet domain names to IP addresses. It is
designed to support dynamic IP addresses, such as those assigned by a DHCP
server.
Specify DynDNS or ezDDNS.
DynDNS: Use Dynamic DNS to manually create your own host name. You will
first need to create a user account using the hosting web site, DynDDNS.org.
ezDDNS: Activate the DDNS auto-detection function to set up a dynamic IP
address. The server is set up to assign an available host name to your recorder.
See page 17 for setup information.
Retrieves a dynamic IP address. See page 17 for setup information.
SNMP is a protocol for managing devices on networks. Enable the SNMP check
box to get camera status and parameter related information. See page 17 for
setup information.
When the feature is enabled, the camera data is secured and user
authentication is needed when connecting the camera to the network. See page
18 for setup information.
QoS (Quality of Service) can help solve the network delay and network
congestion by configuring the priority of data sending.
Enable the option to solve network delay and network congestion by configuring
the priority of data sending.
See page 18 for setup information.
Enter the FTP address and folder to which snapshots of the camera can be
uploaded. See page 18 for setup information.
15
Advertisement
Table of Contents
