Table of Contents
Advertisement
Figure 2: Local configuration window
Live View Parameters
1.
Protocol
2.
Live View Performance
3.
Rules
4.
Image Format
5.
Display Temperature info
6.
Display Temperature info
on Capture
Record File Settings
7.
Record File Size
8.
Save Record Files to
10
Description
Specifies the network protocol used.
Select TCP, UDP, MULTICAST, or HTTP.
Specifies the transmission speed.
Select Shortest Delay or Auto.
These are the rules on your local browser.
Specifies whether or not to display the colored marks when motion
detection, face detection, and intrusion detection are triggered. For
example, when the rules option is enabled and a face is detected, the
face will be marked with a green rectangle in live view.
Choose the image format for a snapshot: JPEG or BMP.
Specifies whether or not to display the temperature information on
Live View.
Select Enable or Disable.
Specifies whether or not to display the temperature info on the
Captured image.
Select Enable or Disable.
Specifies the maximum file size.
Select 256 MB, 512 MB, or 1G.
Specifies the directory for recorded files.
TruVision IP Thermal Camera Configuration Manual
Advertisement
Table of Contents
