Click
Save
to save the setting.
Note: This option is not available if
Analysis + Standard VCA Functions
VCA Resource Type
To set the temperature measurement and alarm:
Use this function to measure the temperature of the selected point/line/frame. The
device compares temperature of selected regions and alarms.
1. From the Configuration panel, click
Temperature Measurement and
2. Draw the desired point, line or frame where you want to monitor a location on the
live view image. Each point, line, and frame must be created individually and the
rules associated with it configured before you can create the next point/line/frame.
Click the Point icon and then click the spot on the image where you want to monitor a
specific point.
48
Temperature Measurement + Behavior
is disabled in the
menu.
Configuration
Alarm.
Configuration
>
Temperature Measurement
TruVision IP Thermal Camera Configuration Manual
>
System
>
>