Nas Settings - Interlogix TruVision TVB-5702 Configuration Manual

NAS settings

You can use a network storage system (NAS) to remotely store recordings.
To configure recording settings, ensure that you have the network storage device set
up within the network. The NAS disk should be available within the network and
correctly configured to store the recorded files, log files, etc.
Notes:
 Up to eight NAS disks can be connected to a camera.
 The recommended capacity of NAS is between 9G and 2T as otherwise it may
cause formatting failure.
 After inserting the SC card into the camera, follow the initialization instructions as for
NAS below.
Caution: We strongly recommend that you use a strong password for all functions and
network devices in order to protect your privacy and to protect your system against
security risks. A valid password range must be at least eight characters. You can use a
combination of numbers, lower and upper case letters, and special characters. The
installer and/or end user are responsible for password management.
To set up a NAS system:
1. Add the network disk.
a) From the Configuration panel, click
b) Enter the server address of the network disk and the NAS file path for each NAS
to be configured.
c) Select the mounting type: NFS or SMB/CIFS. If SMB/CIFS is selected, set the
user name and password to ensure security.
TruVision IP Thermal Camera Configuration Manual
Configuration > Storage > NAS.
65