2. Configure the following settings:
Sender: The name of the email sender.
Sender's Address: The email address of the sender.
SMTP Server: The SMTP Server, IP address or host name.
SMTP Port: The SMTP port. The default is 25.
Enable SSL: Select the check box to enable SSL if it is required by the SMTP
server.
Interval: This is the time between two actions to send attached snapshots.
Attached Snapshot: Select the
emails with attached alarm images.
Authentication: If your email server requires authentication, select this check box
to use authentication to log in to this server. Enter the login user name and
password.
User Name: The user name to log in to the server where the images are uploaded.
Password: Enter the password.
Confirm: Confirm the password.
Receiver1: The name of the first user to be notified.
Receiver's Address1: The email address of the user to be notified. Click Test to
test the address.
Receiver2: The name of the second user to be notified.
Receiver's Address2: The email address of the user to be notified.
TruVision IP Thermal Camera Configuration Manual
Attached Snapshot
check box if you want to send
19