Interlogix TruVision TVB-5702 Configuration Manual page 65

To set up continuous snapshots:
1. From the Configuration panel, click
2. Select the Enable Timing Snapshot
3. Select the desired format of the snapshot, such as JPEG.
4. Select the desired resolution and quality of the snapshot. The quality can be low,
medium, or high.
5. Enter the time interval between two snapshots. Select the unit of time from the drop-
down list: milliseconds, seconds, minutes, hour, or day.
6. Set the schedule for when you want snapshots to be taken. Click
desired schedule for each day of the week.
7. Click Save to save changes.
To set up event-triggered snapshots:
1. From the Configuration panel, click
2. Select the Enable Event-triggered Snapshot check box
snapshots.
TruVision IP Thermal Camera Configuration Manual
Configuration > Storage
check box to enable continuous snapshots.
Configuration > Storage
> Snapshot.
Edit and enter the
> Snapshot.
to enable event-triggered
63