Programming; Using The Camera Menu Button; Using A Tvi Output - Interlogix TruVision TVB-2403 Configuration Manual

Programming

Once the camera hardware has been installed, the camera can be configured
using the built-in OSD button, a TVI DVR menu, or the OSD TVS-C200 controller
(purchased separately).
Note: TVC-2401/4401 does not support the TruVision TVS-C200 OSD controller.

Using the camera Menu button

For the cameras with built-in OSD button, please press the
up the OSD menu and select an OSD item.
Press the button up/down to move the cursor up or down to an OSD item.
Press the button left/right to move the cursor left or right to adjust the value of a
selected OSD item
For more details, please refer to the TVI camera installation manuals.

Using a TVI output

Programming over the camera's TVI output can be done via the connected TVI
DVR.
Access the PTZ menu of the connected DVR, select TruVision-Coax protocol
and use the PTZ control panel to configure the camera.
Table 1: Using the OSD control button
Button direction
Iris+
Up
Left
Right
Down
Zoom
Focus
Note:
TVB-2405/TVB-4405 and TVD-2405/TVD-4405 have motorized lenses. Use the
ZOOM and FOCUS buttons to adjust its zoom and focus.
TVB-2406/TVB-4406 camera has auto-focus capability. When this feature is
enabled, the camera can adjust itself to achieve the best focus automatically.
TruVision HD-TVI 1080P Camera Configuration Manual
Description
Click Iris+ to access to the camera OSD menu and select an OSD item.
Moves the cursor upward to select an item
Moves the cursor left to select or adjust the parameters of the selected
item.
Moves the cursor to the right to select or adjust the parameters of the
selected item.
Moves the cursor downward to select an item.
Adjust the camera zoom in and zoom out
Adjust the camera focus
Menu button to call
3