Interlogix TruVision TVB-5702 Configuration Manual page 38

c) Under Switch Day and Night
switch. Default is OFF.
OFF
Auto-switch
Scheduled switch
d) Under Area, select the desired area number and then click
and drag the mouse on the live video image to draw an area sensitive to motion
detection.
Note: You can draw up to eight motion detection areas on the same live view
image.
e) Set the sensitivity of the selected area to motion detection.
Move the Sensitivity
area.
f) Set the proportion of the object that must be in the selected area to trigger an
alarm.
If OFF selected: Move the
proportion of the object that must occupy the defined area to trigger an alarm.
– Or –
If Auto-Switch: Move the
proportion of the object that must occupy the defined area to trigger an alarm.
– Or –
If Scheduled Switch
set the proportion of the object that must occupy the defined area to trigger an
alarm. Also set when the day starts and ends.
g) Click Stop Drawing
and restart drawing.
h) Click Save to save the changes for that area.
i) Repeat steps (d) to (h) for each area to be defined.
3. Set the arming schedule.
a) Click Edit to edit the arming schedule. The "Edit Schedule Time" window
appears.
36
Settings, select OFF, Auto-switch, or Scheduled-
No day/night switching.
Defines the different settings for day and night.
Defines the different settings for day and night as well as when
day/night starts and ends.
slider to set the sensitivity of the detection for the selected
Proportion of Object on Area
Proportion of Object on Area
selected: Move the
to finish drawing. Click
Draw
slider to set the
slider to set the
Proportion of Object on Area
Clear All to delete all areas marked
TruVision IP Thermal Camera Configuration Manual
Area. Click
slider to