Interlogix TruVision TVB-5702 Configuration Manual page 22

Receiver3: The name of the third user to be notified.
Receiver's Address3: The email address of the user to be notified.
3. Click Test to test the email parameters set up.
4. Click Save to save changes.
To set up the NAT parameters:
1. From the Configuration panel, click
2. Select the check box to enable the NAT function.
3. Select Port Mapping Mode
you can set any desired external port.
4. Click Save to save changes.
To set up the HTTPS parameters:
1. From the Configuration panel, click
2. Create a self-signed certificate:
Click the Create
host name/IP, validity and the other information requested.
20
Configuration
to be Auto or Manual. When you select
Configuration
button beside "Create Self-signed Certificate". Enter the country,
> Network > NAT.
Manual
> Network > HTTPS.
TruVision IP Thermal Camera Configuration Manual
mode,