Omron V530-R160E User Manual page 88

SECTION 4
Basic Operations
The Monitor mode screen will return.
17.
Press the TRIG Key to perform teaching.
If the result of teaching is OK, the Symbol color,
Right & Left reverse, and Matrix Size information is
displayed and the pattern is registered.
Repeat these steps to register multiple patterns.
If the result of the teaching is NG, go to the screen at
adjust the camera focus, lighting and so on, then carry out pattern registration again.
If reading is performed successfully, the teaching function will automatically turn OFF. If the result of
the reading is NG, the teaching function will stay ON. To turn the teaching function OFF, go to the
screen in
dure again from
V530-R160
86
Operation Manual
3.
(pattern list screen). To redo pattern registration, enter SET mode and start the proce-
1.
.
3.
(pattern list screen), delete the pattern,