Selecting The Conditions For Image Storage (Image Storing) - Omron V530-R160E User Manual

SECTION 7
System Settings
Selecting the Conditions for Image Storage (Image
Storing)
A function for saving read images regardless of the selected scene is provided. You can determine the
cause of a reading error from the saved image, then adjust the reading conditions and check the result
by reading the same image again. Images can be automatically backed up in a Memory Card.
The read data currently displayed on the monitor can also be captured and saved in the Memory Card.
Menu item
Storing condition
Store to MemCard
Number of Images
Capture display
The asterisk (*) indicates the default setting.
1.
Go into SYS (system) mode and select Image storing.
Refer to page 180.
The screen for setting the method of image storage
will be displayed.
2.
Make the settings for each item.
3.
Select End.
V530-R160
182
Operation Manual
Select whether or not images read by the controller are saved.
(OFF, Only NG*, All)
Select whether or not images specified by the Storage condi-
tion are automatically backed up in the Memory Card. (OFF*,
ON)
Refer to page 184.
Set the maximum volume of image data that can be backed up
in the Memory Card. When this figure is exceeded, the stor-
age count is cleared and the existing images are overwritten.
(Range: 100* to 1000)
Select whether or not the currently displayed content of the
monitor screen is to be captured.
(OFF*, ON)
Refer to page 185.
Details
Refer to page 183.