Omron V530-R160E User Manual page 39

BNC Jack
(Attached to F150-VM-2D
Monitor cable)
This is the part that captures an image of the object.
Up to 2 cameras can be connected to a V530-R160.
Camera Only
A standard CCTV lens and light will be needed.
F150-S1A-2D
Camera with an Intelligent Lighting
F150-SLC20 (20 mm field of vision)
The Monitor is used to check the image and display menus
when making settings.
Liquid Crystal Monitor (Color)
F150-M05L-2D
Note: Other monitors equipped with an NTSC external video input terminal can also
be used.
Installation and Connections
*
Camera
Monitor
POWER
SYNC
(Pin input)
SECTION 2
V530-R160
37
Operation Manual