Omron V530-R160E User Manual page 243

 Format
The format is explained here in command code order. The commands are input in BCD code. Set
the command in the reading word of the Read Area.
0010: One shot reading
Function • • • Performs one reading.
Reading ends when the reading is correctly performed (OK).
When the reading is not correctly performed (NG), reading continues to be per-
formed for the number of retries specified in the setting conditions.
The reading result is output to the Write Area.
Refer to page 243.
Reading start word
0011: Continuous reading
Function • • • Performs continuous reading.
The reading result is output to the Write Area.
Refer to page 243.
Reading start word
0012: Continuous reading stop
Function • • • Stops continuous reading.
Reading start word
+0 0
+0 0
+0 0
Communication with the Host
Data
0 1 0
Data
0 1 1
Data
0 1 2
SECTION 8
Description
Command code
Description
Command code
Description
Command code
V530-R160
241
Operation Manual