Advertisement
Quick Links
2-Dimensional Code Reader (Fixed Type)
V530-R160E, EP
A code reader that
handles pin-stamped
markings!
Features
Dependably Read Pin-stamped Markings
• Markings made by pin-stamping machines can be dependably
read, providing the user with a wider range of selection of marking
devices.
• Stable reading is possible even if the shape of cells changes
because of aging in the marking device.
(Reference: Stamping using a Vector Co. pin-stamping machine)
Dot Codes* Read at Any Angle: 360° Compatibility
• Codes can be read even with rough backgrounds on the casting
surface or other locations.
• Dot codes* can be read at any angle through a 360° range.
* Dot codes are 2-dimensional codes in which dots form the cells.
V530-R160E, EP
Dependably Read Markings at an Angle
With dependable reading at an angle, installation is possible
even on existing facilities with space limitations.
Easy Setup
Setup is easily achieved with a Memory Card (compact flash
memory) slot on the V530-R160E and V530-R160EP. Just insert
a card to easily copy settings or save images. Carrying a per-
sonal computer and cables is no longer required for process
switchovers.
C-87
Advertisement
Related Manuals for Omron EP
Summary of Contents for Omron EP
- Page 1 • Codes can be read even with rough backgrounds on the casting switchovers. surface or other locations. • Dot codes* can be read at any angle through a 360° range. * Dot codes are 2-dimensional codes in which dots form the cells. V530-R160E, EP...
- Page 2 Easy Operation and Maintenance Trends can be monitored to achieve the following: • Displaying changes in the status (correlation values) of codes or contrast changes on line graphs on a monitor. • Setting alarm levels while monitoring graphs. • Outputting external alarms if a value falls below the set value.
-
Page 3: Ordering Information
The spread of TS16949* has made the traceability of important safety parts, such as those found in engines, a major movement. * TS16949: A new international quality system standard created in March 1999 for the automotive industry. Cylinder block Ordering Information... -
Page 4: Specifications
Input/Output type Data Matrix ECC200: 10 × 10 to 64 × 64, 8 × 18, 8 × 32, 12 × 26, 12 × 36, 16 × 36, 16 × 48 Data Matrix ECC000, ECC050, ECC080, ECC100, ECC140: 9 × 9 to 25 × 25 Applicable codes QR Code (Model 1, 2): 21 ×... -
Page 5: System Configuration
System Configuration Synchronous Sensor F150-KP Console Programmable Controller RS-232C Cable for SYSMAC PLC: XW2Z-200T Personal Computer RS-232C Cable for DOS Computer: XW2Z-200S-V V530-R160E V530-R160EP Controller F160-VP Parallel Cable Cameras F150-S1A Camera F150-VS Camera Cable Monitors Memory Cards 64 MB: F160-N64S(S) - Page 6 +0.5 mm ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. Cat. No. Q13E-EN-01 In the interest of product improvement, specifications are subject to change without notice.