Screen Displays - Omron V530-R160E User Manual

Screen Displays

 Basic Screen Configuration
Scene Number
There are 10 scenes. Setting
different measurement condi-
tions for each one allows easy
switching between different set-
ups.
Note 1:
Mode
Display
SET
MON
RUN
SYS
TOOL
SAVE
Used to set reading conditions.
Used to confirm the reading can be properly performed under the set condi-
tions. The reading judgements are displayed on the monitor only. The results
cannot be output to the host.
Used to read codes. The reading judgements are output to a host via the serial
interface.
Used to set system conditions for the V530-R160.
Provides the data backup menu and memory card-related menus.
Used to back up setting data or image data to a computer or a Memory Card.
Used to save setting data to flash memory. If new settings have been made, be
sure to save the data before quitting.
Basic Operations
Mode (See note 1.)
The current mode is displayed.
The type of image being dis-
played is shown. (See note 2.)
Refer to page 72.
Description
SECTION 4
V530-R160
71
Operation Manual