Omron V530-R160E User Manual page 213

0 3 0 2 0 0 1 0 3 2 6 - A B C D E F G - 0 8 1 5
Number
of digits
Set Items and their details
Item
Attach digit no. OFF*
ON
Limit Data Function OFF*
ON
Start Point When ON is set for Limit Data Function, set the Start Point of the data to be out-
put. The start number is counted from the beginning of the reading data. The num-
ber of digits is not included.
(1 to 999; default setting: 1)
End Point When ON is set for Limit Data Function, set the End Point of the data to be out-
put. The end number is counted from the beginning of the reading data. The num-
ber of digits is not included.
(1 to 999; default setting: 999)
Polling OFF*
ON
The asterisk (*) indicates the default setting.
Limit Data Function
Start Point
Reading data
The number of digits of the reading data is not output.
The number of digits of the reading data is output.
The number of digits is shown in bytes.
• A letter or a number is 1 digit.
All of the reading data is output.
The specified range of reading data is output.
Specify the data output range with Start Point and End Point.
Reading data
Example: 03 0 2 0 0 103 26 - ABC DEFG - 0 81 5
Start Point: [4]
The reading data will be output to the host immediately after it is read.
When the V530-R160 is connected with a 1:1 connection, use the polling
command to control the timing of reading data outputs. Reading data is
output when a polling command is input.
Communication with the Host
Limit Data Function
End Point
Selection
End Point: [8]
SECTION 8
V530-R160
211
Operation Manual