SECTION 9
Troubleshooting
Communications error
Communications error
Communications error
Timeout error
Timeout error
Timeout error
Incorrect data format received.
Data are too large.
Cannot save by serial communication.
* : The ERR signal only turns ON when an error occurs in the MON mode or RUN mode.
V530-R160
258
Operation Manual
Error message
*
Countermeasures
Turn OFF the power to the V530-R160, and check for
the following items before restarting the V530-R160.
• Is the cable connected properly?
• Are the communications specifications for the host
device and the V530-R160 the same?
• Is the host device operating properly?
(Reason)
Data transfer has been interrupted due to a commu-
nications error in communications between the V530-
R160 and a host device.
If the same error message appears after restart, it may
mean that the V530-R160 is faulty. Contact your
OMRON representative.
Select the correct transfer file and re-execute the data
transfer.
(Reason)
The wrong file has been selected.
Save the data to a Memory Card or delete surplus data
and then save.
(Reason)
Data 2MB or greater cannot be saved using serial
communications.
p.192
p.206
p.236
−
−