Inputting Characters - Omron V530-R160E User Manual

Inputting Characters

This section explains how to input characters in file names, comments etc.
The software keyboard shown below is displayed on the screen where characters are input.
These characters can be input.
1.
Move the cursor to the character to be input.
2.
Press the ENT Key.
The character is set and the I cursor moves one
space to the right.
3.
Repeat these steps to input more characters.
4.
Once all required characters have been input,
move the cursor to END.
5.
Press the ENT Key.
The characters will be set.
SPC Insert a space.
DEL Deletes 1 character to the right of the I cursor.
BS Deletes 1 character to the left of the I cursor.
INS Switches between insert (default)/overwrite.
←
Moves the I cursor to the left.
→
Moves the I cursor to the right.
END Ends character input.
I cursor
SECTION 4
Basic Operations
Cursor
V530-R160
Operation Manual
75