SECTION 8
Communication with the Host
@ MS
Function1 • • • Obtains the scene number (0 to 9) of the currently displayed scene.
Send
Receive
Function 2 • • • Changes the currently displayed scene.
Send
Receive
V530-R160
226
Operation Manual
@
M
S
Data is output from the controller without a polling command.
<Unit number>
<Header>
@
M
S
Set the desired scene number (0 to 9).
Data is output from the controller without a polling command.
Command executed correctly:
<Header>
<Unit number>
Command not executed correctly:
<Header>
<Unit number>
<Unit number>
<Footer>
<Scene number>
<Unit number>
<Scene number>
O
K
<Footer>
E
R
<Footer>
<Footer>
<Footer>