Omron V530-R160E User Manual page 137

If reading is performed successfully, the teaching function will automatically turn OFF. If reading is
not performed correctly (NG), the teaching function will stay ON. To turn the teaching function OFF,
go to the screen in
the procedure again from
The following setting information for pattern registration is displayed on the Pattern list screen.
Item
Pattern
Version
Color
R&L rev.
Corr. (Correlation)
Priority
Applied rate
To register a pattern again or register a new pattern, select the pattern number and press ENT Key,
and repeat the procedure from step
Refer to page 131.
3.
(pattern list screen). To redo pattern registration, enter SET mode and start
5..
Selected pattern number
Matrix size (Version)
Symbol color of the pattern
Execution/non-execution of pattern Right & Left reverse
Pattern correlation value
Pattern sequence used when reading
Refer to page 113.
Applied rate of the pattern
Number of times a pattern is used
Applied rate =
* The maximum number of reads is the most recent 10000.
5..
Setting Reading Conditions
Pattern setting information
Description
Total reads*
SECTION 5
V530-R160
135
Operation Manual