Omron V530-R160E User Manual page 187

 Display Captures
Turn ON the display capture function to capture the image displayed on the monitor and save it to
the Memory Card.
Stored images can be pasted to documents on a personal computer or loaded to the V530-R160
and re-read.
The capture operation takes several seconds, during which reading cannot be performed. To pre-
vent incorrect operation, set this function to OFF.
 Execution keys
Capture a display by pressing SHIFT + Left + Right Keys simultaneously.
 Display capture results
When a capture is executed, capture in progress will be displayed at the bottom right of the
screen. After that, a directory called IMAGE will automatically be created in the root directory of
the Memory Card and the following two types of files will be stored in that directory.
Captured display
LIVE***.BMP
CAPT***.BMP
A serial number starting from 000 will be automatically allocated to ***.
The same number is used for both files.
SECTION 7
System Settings
Density images with 256 grad-
uations will be saved in BMP
format. These images can be
loaded to the V530-R160 and
re-read.
The displayed screen image is
saved without alteration in BMP
format. (However, the image
will have 192 graduations.)
Only this file will be saved if the
image was captured while in
SET, SYS, TOOL modes.
V530-R160
Operation Manual
185