SECTION 8
Communication with the Host
Command List
Command List
1:1 connection
• Instructing operations at the controller
These are the commands used to instruct the controller to perform operations such as reading or
changing the scene.
Command
@GL
@GC
@SC
@RD
@RL
@SN
@DC
@MC
@MT
@SV
@VR
• Saving and loading data
These commands back up the data and saved images set at the controller in the host.
Command
@AL
@AS
@BL
@BS
@CL
@CS
V530-R160
212
Operation Manual
Performs one reading.
Starts continuous reading.
Stops continuous reading.
Outputs reading data to the serial interface. (Polling)
Outputs reading data to the serial interface.
(Polling with digit position specified)
Obtains the scene number of the currently displayed scene.
Switches to the specified scene number.
Switches the display status (through/freeze) of the image.
Switches between the MON mode and the RUN mode.
Obtains the processing time.
Saves the setting details in the flash memory.
Reads the system's version information.
Loads the system and scene data from the host.
Saves the system and scene data to the host.
Loads the image data from the host.
Saves the image data to the host.
Loads the scene data from the host.
Saves the scene data to the host.
Function
Function
Page
p.216
p.216
p.217
p.217
p.218
p.218
p.219
p.219
p.220
p.220
p.221
p.221
Page
p.222
p.222
p.223
p.223
p.224
p.224