Component Names And Functions - Omron V530-R160E User Manual

SECTION 2
Installation and Connections

Component Names and Functions

1. POWER indicator
2. RUN indicator
3. ERROR indicator
4. I/O terminals
(Control lines)
5. I/O connector
(Control and data lines)
6. Camera connectors
7. Power supply terminals
1. Lit while power is ON.
2. Lit in RUN mode.
3. Lit when an error occurs.
4. and 5. Connects the V530-R160 to host devices such as a sync sensor or PLC.
6. Connects to the Camera.
7. Wired to the power supply.
8. Connects to the monitor.
9. Connects to the ground wire.
10. Connects the V530-R160 to a host device such as a personal computer or PLC.
11. This lock secures the Memory Card so that it does not disconnect unintentionally due to
vibration.
12. Covers the compartment that contains the V530-R160's battery.
13. This slot receives the Memory Card.
14. Lit when power is being supplied to the Memory Card. (The Memory Card must not be
inserted or removed when this indicator is lit.)
15. Connects the V530-R160 to a Console.
V530-R160
38
Operation Manual
8. Monitor connector
15. Console connector
V 5 3 0
P O W - R 1 6
E R 2 D C
0
O D E
R E A
R U N D E R
E R R
O R
C O N
S O L E
C A M
E R A
0
C A M
E R A
1
M O N
IT O R
+
2 4 V
D C
-
9. Ground terminal
14. Memory Card indicator
13. Memory Card slot
12. Battery cover
11. Card lock
10. RS-232C/422 connector