SECTION 4
Basic Operations
1.
Select 1. Read DataMatrix.
To change the code to be read, press
SHIFT+ ESC Keys.
The initial screen for the DataMatrix reading will be
displayed.
2.
Select Pattern settings.
The Pattern list will be displayed.
3.
Select the pattern number to be registered.
Up/Down/Left/Right Keys:
The selected pattern number is indicated with a
solid-line frame.
4.
Press the ENT Key to validate the setting.
The Pattern settings selections will be displayed.
5.
Select Pattern registration.
V530-R160
82
Operation Manual
To move among pat-
tern numbers.