Omron V530-R160E User Manual page 85

The Pattern registration screen will be displayed.
6.
Select the image to be registered by pressing
the SHIFT + Up or Down Keys.
7.
Press the ENT Key to validate the setting.
The Matrix Size selections will be displayed.
8.
Select the Matrix Size.
The Length of Finder Pattern setting screen will be dis-
played.
9.
Select the first end point of the L shape.
Draw the L shape by matching it to the shape of the
code.
Up/Down/Left/Right Keys:
Shift + Up/Down/Left/Right Keys: To move the cursor
At the bottom left of the screen are displayed the length of the L shape, the number of pixels per cell
(the numerical value in parentheses), the angle, and the coordinates of the three points. Adjust the
field of vision so that there are at least 5 pixels per cell.
Refer to pages 46 to 48 (Sec.2).
To move the cursor.
10 times faster.
SECTION 4
Basic Operations
V530-R160
Operation Manual
83