SECTION 3
Connection to the Host
I/O Connector Connections
Use a F160-VP Parallel I/O Cable (order separately) to connect to the V530-R160's I/O connec-
tor. Align the connectors and insert the cable's connector straight into the V530-R160's I/O con-
nector. Tighten the connector's mounting screws to secure the connection.
V530-R160
A1
RS-232C/422
CAMERA1
A20
• Turn OFF the power to the V530-R160 before connecting or disconnecting cables. Peripheral
devices can be damaged if connected or disconnected with the power supply turned ON.
• A cover is screwed onto the connector when the V530-R160 is shipped. When not using the I/O
connector, leave the cover in place to protect against dust, dirt, and static electricity.
V530-R160
56
Operation Manual
F160-VP Parallel I/O Cable (2 m)
B1
B20
Use an appropriate ground (100
Wire color
FG terminals
Marking
max.).