HEIDENHAIN iTNC 530 Technical Manual page 201

Hide thumbs Also See for iTNC 530:

Table of Contents

Function and input

Max. permissible surface cutting speed at the tooth edge

Maximum permissible speed during tool measurement

Coordinates of the TT 130 probe contact center with

respect to the machine datum (traverse range 1)

Coordinates of the TT 130 probe contact center with

respect to the machine datum (traverse range 2)

Coordinates of the TT 130 probe contact center with

respect to the machine datum (traverse range 3)

Monitoring the position of the rotary and additional linear

axes during the tool measurement cycles

Ref. coordinate for monitoring the position of the rotary and

additional linear axes during the tool measurement cycles

February 2002

1.0000 to 129.0000 [m/min]

1 to 1000 [rpm]

0: 1000 [rpm]

-99 999.9999 to +99 999.9999 [mm]

0: Axis is not monitored

1: Axis is monitored

Bit 0 – A axis

Bit 1 – B axis

Bit 2 – C axis

Bit 3 – U axis

Bit 4 – V axis

Bit 5 – W axis

-99 999.9999 to +99 999.9999 [mm or °]

List of Machine Parameters