Linear Axis Error Compensation - HEIDENHAIN iTNC 530 Technical Manual

6.4.2 Linear Axis Error Compensation

6 – 36
Note
Linear axis error compensation is not available for rotary axes!
For every linear axis you can compensate a linear axis error.
Positive linear axis error: The table moves too far.
Negative linear axis error: The table moves short.
Error
[mm]
0.02
0.01
0
Ref. mark
-0.01
-0.02
Compensation:
7
In MP720, enter the axis error in [mm/m].
7 With MP730, activate the linear axis error compensation.
MP720.x Linear axis error compensation
Input: –1.000 to +1.000 [mm/m]
MP730 Selection of linear/nonlinear axis error compensation
Format: %xxxxxxxxxxxxxx
Input: Bits 0 to 13 correspond to axes 1 to 14
0: Linear axis error compensation
1: Nonlinear axis error compensation
500 1000
HEIDENHAIN Technical Manual iTNC 530
Encoder
[mm]