Graphic Display; Projection In Three Planes; Rotation Of The Coordinate System - HEIDENHAIN iTNC 530 Technical Manual

7.1.3 Graphic Display

Projection in three
planes
Rotation of the
coordinate system
7 – 10
In the graphics window you can view the following graphics:
n
Test graphics
n
Parallel graphics
n
Programming graphics
n
Help illustration
For the test graphics and parallel graphics you can choose one of three display
modes:
n

Projection in three planes

n
Plan view
n
3-D view
The display in three planes can be shown in 1st-angle projection as preferred
in Germany or in the American-style 3rd-angle projection:
7 Select the type of projection with MP7310, bit 0
German preferrred
Example
:
You can rotate the coordinate system for graphic display by +90° if, for
example, the Y axis is defined as tool axis.
7 Select the angle of rotation with MP7310, bit 1
X
No rotation
U.S. preferred
Z X
90° rotation
HEIDENHAIN Technical Manual iTNC 530
Z