HEIDENHAIN iTNC 530 Technical Manual page 459

February 2002
During recording, the selected signals are continuously displayed. After
recording ends, the memory contents are displayed. For every channel, the
type of signal and the resolution are also shown. The length of the recorded
range, with respect to the entire memory content, is shown as a bar in the
status field.
7 Move the cursor with the arrow keys. The status field shows the amplitude
of the selected channel and the time with respect to the beginning of
recording.
7 Activate a second cursor by pressing the CURSOR 1/2 soft key. The
oscilloscope displays the amplitude and time of this cursor. The time [s] of
the second cursor is shown with respect to the time point of the first cursor.
With this function you can measure the acceleration time of an axis, for
example.
Integrated Oscilloscope 6 – 215