Perform Engine Maintenance - Deutz 1011F Models; Check The Exhaust System - Genie GS-3384 Service Manual

September 2005
REV D
B-3
Perform Engine Maintenance -
Deutz 1011F Models
Engine specifications require that
this procedure be performed every
250 hours or quarterly, whichever
comes first.
Required maintenance procedures and additional
engine information is available in the Deutz 1011F
Operation Manual (Deutz part number 0297 9683).
Deutz 1011F Operation Manual
Genie part number
Part No. 82259
Section 3 • Scheduled Maintenance Procedures
B-4

Check the Exhaust System

Maintaining the exhaust system is essential to
good engine performance and service life. Running
the engine with a damaged or leaking exhaust
system can cause component damage and unsafe
operating conditions.
52883
1 Release the latches on the engine tray and fully
slide the engine tray out.
2 Insert a 6 inch / 15 cm screwdriver or rod into
the engine tray lock hole located near the
engine tray roller wheels to prevent the engine
tray from moving.
3 Be sure that all fasteners are tight.
4 Inspect all welds for cracks.
5 Inspect for exhaust leaks; i.e., carbon buildup
around seams and joints.
GS-3384
CHECKLIST B PROCEDURES
Bodily injury hazard. Do not
inspect while the engine is
running. Remove the key to
secure from operation.
Bodily injury hazard. Beware of
hot engine components. Contact
with hot engine components may
cause severe burns.
3 - 21