Perform Engine Maintenance - Ford Models - Genie GS-3384 Service Manual

Section 3 • Scheduled Maintenance Procedures
CHECKLIST B PROCEDURES
GM models:
1 Release the latches on the engine tray and fully
slide the engine tray out.
2 Insert a 6 inch / 15 cm screwdriver or rod into
the engine tray lock hole, located near the
engine tray roller wheels, to prevent the engine
tray from moving.
3 Disconnect the two end cap retaining clips and
remove the end cap from the air filter canister.
4 Remove the air filter element.
5 Clean the inside of the canister with a damp
cloth.
6 Install the new filter element.
7 Install the air filter canister end cap and the end
cap retaining ring.
3 - 34
B-21
Perform Engine Maintenance -
Ford Models
Engine specifications require that
this procedure be performed every
400 hours or semi-annually,
whichever comes first.
Required maintenance procedures and additional
engine information is available in the
Ford LRG425 Operator Handbook
(Ford part number FPP 194-302).
Ford LRG 425 Operator Handbook
Genie part number
GS-3384
September 2005
REV D
84792
Part No. 82259