Maintenance Inspection Report - Genie GS-3384 Service Manual

September 2005
Model
Serial number
Date
Hour meter
Machine owner
Inspected by (print)
Inspector signature
Inspector title
Inspector company
Instructions
· Make copies of this report to use for
each inspection.
· Select the appropriate checklist(s) for
the type of inspection to be
performed.
Daily or 8 hour
Inspection:
Quarterly or 250 hour
Inspection:
Semi-annually or 500 hour
Inspection:
Annually or 1000 hour
Inspection:
2 Year or 2000 hour
Inspection: A+B+C+D+E
· Place a check in the appropriate box
after each inspection procedure is
completed.
· Use the step-by-step procedures in
this section to learn how to perform
these inspections.
· If any inspection receives an "N", tag
and remove the machine from service,
repair and re-inspect it. After repair,
place a check in the "R" box.
Legend
Y = yes, acceptable
N = no, remove from service
R = repaired
Comments
Part No. 82259

Maintenance Inspection Report

Checklist A - Rev C
A-1 Pre-operation inspect
A-2 Function tests
A-3 Engine maintenance -
Ford models
A-4 Engine maintenance -
Deutz models
A-5 Coolant level -
GM models
A-6 Engine air filter -
GM models
Perform every 40 hours:
A-7 Battery - GM models
A-8 Radiator - GM models
Perform after 40 hours:
A-9 Fasteners - GM models
A-10 30 day service
Perform after 50 hours:
A-11 Engine maintenance -
Deutz models
Perform every 100 hours:
A-12 Engine maintenance -
Ford models
A
A-13 Alternator belt -
GM models
A+B
A-14 Filter condition indicator
(if equipped)
A+B+C
Perform every 125 hours:
A-15 Engine maintenance -
A+B+C+D
Deutz 1011F models
Perform every 200 hours:
A-16 Filter/separator -
Deutz models
A-17 Engine maintenance -
Ford models
A-18 Engine oil - GM models
Section 3 • Scheduled Maintenance Procedures
Y N R
GS-3384
Checklist B - Rev D
B-1 Battery
B-2 Electrical wiring
B-3 Engine maintenance -
Deutz 1011F models
B-4 Exhaust system
B-5 Engine air filter -
Ford/Deutz models
B-6 Engine RPM
B-7 Brake configuration
B-8 Tires and wheels
B-9 Drive hub oil level
B-10 Key switch
B-11 Emergency Stop
B-12 Horn
B-13 Fuel select -
Ford/GM models
B-14 Drive brakes
B-15 Drive speed - stowed
B-16 Drive speed - raised
B-17 Hydraulic oil analysis
B-18 Pressure filters
B-19 Tank venting systems
Perform every 400 hours:
B-20 Engine air filter -
Ford and GM models
B-21 Engine maintenance -
Ford models
B-22 Fuel filter -
GM models
B-23 Engine air filter -
GM models
B-24 Engine coolant -
GM models
Y N R
3 - 5