Polar Look Kéo Power Sensor Bluetooth® Smart; Pair A Mobile Device With M460; Delete A Pairing - Polar Electro M460 User Manual

Hide thumbs Also See for M460:

Table of Contents

1. Go to General Settings > Pair and sync > Pair other device and press START.

2. M460 starts searching for your heart rate sensor.

3. Once the heart rate sensor is found, the device ID, for example, Pair Polar H10 xxxxxxxx, is displayed. Choose

the heart rate sensor you want to pair.

4. Press START, Pairing is displayed.

5. Pairing completed is displayed when you are done.

1. Press START in time view to enter pre-training mode.

2. To pair, touch your sensor with M460 is displayed, touch your heart rate sensor with M460, and wait for it to

be found.

3. M460 lists the heart rate sensors it finds.The device ID, for example, Pair Polar H10 xxxxxxxx, is displayed.

Choose the heart rate sensor you want to pair and then choose Yes.

4. Pairing completed is shown when you are done.

POLAR LOOK KÉO POWER SENSOR BLUETOOTH® SMART

Before pairing a mobile device, create a Polar account if you do not already have one, and download Flow app from

the App Store or Google Play. Make sure you have also downloaded and installed FlowSync software onto your com-

puter from flow.polar.com/start, and registered your M460 in the Flow web service.

Before trying to pair, make sure your mobile device has Bluetooth turned on, and airplane mode/flight mode is not

turned on.

To pair a mobile device:

1. In M460, go to Settings > General settings > Pair and sync > Pair and sync mobile device and press

START.

2. Once your device is found, the device ID Polar mobile xxxxxxxx is displayed on M460.

3. Press START, Connecting to device is displayed, followed by Connecting to app.

4. Accept the Bluetooth pairing request on your mobile device and type in the pin code shown on your M460.

5. Pairing completed is displayed when you are done.

1. On your mobile device, open Flow app and sign in with your Polar account.

2. Wait for the Connect product view to appear on your mobile device (Searching for Polar M460) is displayed.

3. In M460 time mode, press and hold BACK.

4. Connecting to device is displayed, followed by Connecting to app.

5. Accept the Bluetooth pairing request on your mobile device and type in the pin code shown on your M460.

6. Pairing completed is displayed when you are done.

To delete a pairing with a sensor or mobile device:

Table of Contents