Table of Contents
Advertisement
PAIRING COMPATIBLE BLUETOOTH SMART ® SENSORS WITH M460
In addition to a number of Polar sensors your M460 is fully compatible with several third-party Bluetooth power
meters. Please check the full compatibility table from support.polar.com. Please make sure that you have the latest
firmware both in your M460 and in the third-party power sensor. Follow the manufacturer's instructions to calibrate
the power sensor.
POLAR CADENCE SENSOR BLUETOOTH® SMART
The most practical way of measuring your cycling session is with our advanced wireless cadence sensor. It measures
your real-time, average and maximum cycling cadence as revolutions per minute so you can compare the technique of
your ride against previous rides.
•
Improves your cycling technique and identifies your optimal cadence
•
Interference-free cadence data lets you evaluate your individual performance
•
Designed to be aerodynamic and light
PAIR CADENCE SENSOR WITH M460
Make sure the cadence sensor has been correctly installed. For more information on installing the cadence sensor
refer to the user manual of the cadence sensor.
There are two ways to pair a cadence sensor with your M460:
1. Go to General Settings > Pair and sync > Pair other device and press START.
2. M460 starts searching for the cadence sensor. Rotate the crank a few times to activate the sensor. The flashing
red light on the sensor indicates that the sensor is activated.
3. Once the cadence sensor is found, Polar CAD xxxxxxxx is displayed.
4. Press START, Pairing is displayed.
5. Pairing completed is displayed when the pairing is ready.
6. Sensor linked to: is displayed. Choose Bike 1, Bike 2 or Bike 3. Confirm with START.
The first cycling sensor you pair will automatically be linked to Bike 1 .
or
1. Press START in time view to enter pre-training mode.
2. M460 starts searching for your cadence sensor. Rotate the crank a few times to activate the sensor. The flash-
ing red light on the sensor indicates that the sensor is activated.
3. The device ID Pair Polar CAD xxxxxxxx is displayed. Choose Yes.
4. Pairing completed is displayed when the pairing is ready.
5. Sensor linked to: is displayed. Choose Bike 1, Bike 2 or Bike 3. Confirm with START.
POLAR SPEED SENSOR BLUETOOTH® SMART
There are a range of factors that can affect your cycling speed. Obviously fitness is one of them, however, weather con-
ditions and the varying gradients of the road play a huge part too. The most advanced way of measuring how these
16
Advertisement
Table of Contents
