Notes On Connecting/Disconnecting Cables - Fujitsu ETERNUS CS800 S5 User Manual

Hardware Description and Basic Operations

Notes on connecting/disconnecting cables

V
Connecting cables
Turn off all power and equipment switches.
●
Disconnect all power plugs from the properly grounded power outlets.
●
Connect all cables to the server and peripherals.
●
Plug all data communication cables into the utility sockets.
●
Plug all power cords into the properly grounded power outlets.
●
Disconnecting cables
Turn off all power and equipment switches.
●
Disconnect all power plugs from the properly grounded power outlets.
●
Unplug all data communication cables from the utility sockets.
●
Disconnect the relevant cables from the server and all the peripherals.
●
I
U41840-J-Z125-7-76
CAUTION!
Always read the documentation supplied with the device you wish to connect.
Never connect, or disconnect cables during a thunderstorm.
Never pull on a cable when disconnecting it. Always take hold of the cable by the
plug. Be sure to wait for 10 seconds or more after shutdown before turning the
server on.
Follow the sequence described below to connect or disconnect external devices to
or from the server:
For connecting or disconnecting LAN cables, the server does not need to be
powered off. To avoid loss of data either stop the I/O or make sure the cable is
redundant, i.e. a member of a bond.
Server
55