Fujitsu ETERNUS CS800 S5 User Manual page 232

VTL
●
After you select an action, the table is updated to show only the cartridges that support
the selected action. Select Show All Media in the Action drop-down box to see all
cartridges.
3. (Optional) To reduce the number of cartridges displayed in the table, enter a barcode or
barcode range in the Barcode Filter box and click Apply Filter.
Use a hyphen (-) to indicate a range, and use an asterisk (*) to indicate a wildcard.
Separate multiple entries with commas, and do not use spaces.
For example, enter AAA* to display all cartridge barcodes beginning with AAA. Or enter
AAA010-AAA020 to display all barcodes in the specified range. Click the Quick Tip
icon [?] for additional examples.
4. Select the cartridges to perform the action on. The action is performed only for selected
cartridges on the current page.
Or select the check box in the table heading row to perform the action on all cartridges
in the partition.
I
5. Click Apply.
Media Move
Use the Media Move page to move a virtual tape cartridge from a source location (drive,
storage slot, or I/E slot) to a destination location (drive, storage slot, or I/E slot). The location
and destination must be in the same partition.
I
V
To access the Media Move page, on the Media page, click the Move tab (see
218
Import Media - Imports cartridges into the currently selected partition. Cartridges
that are in the exported or vaulted state can be imported from another partition with
the same media type and data deduplication settings.
If necessary, use the controls at the bottom of the table to navigate between
multiple pages of results. Select the number of rows to display in the Show
drop-down box.
If you do not create and associate a host access group with a partition, the virtual
devices are not visible from the host, and drives cannot be destinations for move
operations (see "Remote Host Access" on page
CAUTION!
Moving a virtual tape cartridge might disrupt backup jobs.
222).
U41840-J-Z125-7-76
Configuration
Figure 138).