Step 3: Recipients - Fujitsu ETERNUS CS800 S5 User Manual

Email Alerts Wizard
Figure 110: Email Alerts Wizard: Server

Step 3: Recipients

1. Under Add Email Recipient, enter information about the recipient (see
●
●
●
2. Select the Notification Enabled check box to enable sending of notifications to the
recipient.
170
Name - The name of the recipient.
Email Address - The e-mail address of the recipient.
Notification Type - Select the types of notifications to send to the recipient:
High - Send e-mail notifications for High service tickets.
●
High service tickets indicate that a critical problem has occurred and needs to
be resolved immediately. The operation and performance of the ETERNUS
CS800 are degraded, and there is a risk of system failure or data loss.
High and Medium - Send e-mail notifications for High and Medium service
●
tickets.
Medium service tickets indicate that a serious problem occurred and needs to
be resolved, but it does not necessarily need to be fixed immediately. The
operation and performance of the ETERNUS CS800 may be degraded.
All - Send e-mail notifications for High, Middle, and Low service tickets, as well
●
as any administration alerts.
Low service tickets indicate that a minor problem occurred and needs to be
resolved, but the operation and performance of the ETERNUS CS800 are not
significantly affected.
Configuration Wizards
Figure 111):
U41840-J-Z125-7-76