Status
To access the Logical View page, on the VTL page, click the Logical View tab (see
Figure
247).
Figure 247: Logical View Page
The Partitions section displays the following information about VTL partitions:
Partition - The name of the partition.
●
Number of Drives - The number of virtual tape drives in the partition.
●
Capacity - The storage capacity of the partition.
●
Used - The amount of space on all cartridges in the partition currently used to store
●
data.
Used Percent - The amount of currently used space on all cartridges in the partition
●
expressed as a percentage of the total capacity ([Used / Capacity] x 100).
V
U41840-J-Z125-7-76
CAUTION!
The Used (%) value is not updated while the media is mounted. Because of this,
the displayed Used (%) value may be different from the real value for mounted
media.
VTL
411