Date & Time - Fujitsu ETERNUS CS800 S5 User Manual

Configuration
A green border indicates a port is connected to a network.
●
A red border indicates a port is configured but is not connected to a network.
●
Click Update Port View to update the information on the diagram.
●
Date & Time
The Date & Time page allows you to set the system date and time of the ETERNUS CS800.
You can specify a Network Time Protocol (NTP) server to synchronize the system time with,
or you can manually enter the date and time.
V
I
To access the Date & Time page, on the System page, click the Date & Time tab (see
Figure 185).
Figure 185: Date & Time Page
U41840-J-Z125-7-76
CAUTION!
Changing the date and time settings requires a system reboot immediately after the
changes are applied. Wait for at least 15 minutes before logging back in.
If you intend to join the ETERNUS CS800 to a Windows network using Active
Directory for NAS storage, Fujitsu recommends using an NTP Server to set the
system date and time (see "Windows Domain" on page
System
194).
299